Generic

Metric Buna O-rings 17 x 1mm Minimum 25 pcs

Metric Buna 70 O-rings 17mm ID x 19mm OD x 1mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels, water...

Metric PTFE White O-rings 21 x 1mm Price for 1 pc

Metric PTFE O-rings 21mm ID x 23mm OD x 1mm C/S PTFE White hard plastic orings Good for Chemical and High Heat applications Temperature range -300°F to +500°F Price is $1.10 each

Stainless Garter Springs for 38mm Shaft Minimum 2 pcs

Stainless Garter Springs  Fits 38mm shaft or Inside Diameter of oil seal 38mm ID x 2mm coil diameter 316 Stainless Steel material Used on Buna NBR oil seals for corrosive environments Price is...

Buna O-rings # 039-90D Minimum 10 pcs

Buna 90 O-rings Size#039B90= 2-3/4 ID x 2-7/8 OD x 1/16 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants,...

EPDM 70 O-rings FDA/NSF Size 039 Minimum 10 pcs

EPDM 70 Durometer O-rings Size#039E= 2-3/4 ID x 2-7/8 OD x 1/16 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based...

FKM 90 Black Orings Size 039 Minimum 3 pcs

FKM Heat Resistant Orings Size #039 = 2-3/4 ID x 2-7/8 OD x 1/16 CS 90 Durometer Rubber FKM Orings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for...

Metric Buna O-rings 17.5 x 1mm Minimum 25 pcs

Metric Buna 70 O-rings 17.5mm ID x 19.5mm OD x 1mm CS 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels, water and...

Oil Shaft Seal 1-1/16 x 1-3/4 x 3/8" Double Lip Price for 1 pc

Inch - Oil Shaft Seals Double Lip NBR 1-1/16" ID x 1-3/4" OD x 3/8"Height 7 PSI Buna N Rubber Sealing Lip Seals in Grease and keeps surface clean Double lip

#309-78600011 fits Kato Bucket HD900SEV

#309-78600011 fits Kato Bucket HD900SEV 85mm Rod x 130mm Bore Includes Wiper, U cup, 2pc oring, 2pc backup, 4pc wear band, Buffer and Piston seals 

0259307 Wear Band Seal fits Hitachi Cylinders

0259307 Wear Band Seal fits Hitachi Cylinders Fits Hitachi Cylinders Wear Ring 170x9.4x4mm TFE 2 pcs required per cylinder Aftermarket kit guaranteed quality

12mm ID x 19.5mm OD x 3.2mm Buffer Seal Price for 1 pc

Metric Rod Buffer Seal  12mm ID x 19.5mm OD x 3.2mm Buffer Seal 2 piece design consists of PTFE filled ring with outer rubber energizer Nitrile 70 This seal is great for protecting the...

231-35413 Bucket Cylinder Seal Kit fits JCB 8015

231-35413 Bucket Cylinder Seal Kit fits JCB 8015   8015 Bucket Cylinder Serial# M894878-M895999 30mm Rod x 50mm Bore Includes Wiper, U seal and Piston seals Aftermarket seal kit